|
Keycode |
Specification |
| Device Report | |
|---|---|
| 4 |
Review complete device configuration report |
| 4*N |
Report entire configuration for Device N |
| 4*N** |
Restore all parameters for Device N to default |
| 4*N*0 |
Enable Scan on Device N |
| 4*N*1 |
Disable Scan on Device N |
| Telephone Device Report | |
|---|---|
|
40 |
Review all telephone configuration items |
|
40** |
Reset all telephone configuration items to default |
| Call Progress Monitoring | ||||||
|---|---|---|---|---|---|---|
|
401 |
Read status of Call Progress Monitoring (CPM) |
|||||
|
401** |
Reset CPM to default |
|||||
|
401*0 |
Set CPM to ON |
|||||
|
401*1 |
Set CPM to OFF |
|||||
| This feature enables or disables CPM. When CPM is off, the unit will disregard ringing, and consider the phone answered. After 5 seconds the notification report will begin. | ||||||
|
||||||
|
||||||
| Country Code | ||||||
|---|---|---|---|---|---|---|
|
402 |
Read country code setting |
|||||
|
||||||
|
||||||
| Outgoing Call Timer | ||||||
|---|---|---|---|---|---|---|
|
403 |
Read outgoing call time limit |
|||||
|
403** |
Reset outgoing call time limit to default |
|||||
|
403*V |
Set outgoing call answer limit |
|||||
| This is the amount of time that the unit will wait between a destination answering the call, and the start of the session. Associated with Alarmware™, Log File downloading, and Central Station contact. | ||||||
|
||||||
|
||||||
| Ring Answer Delay | ||||||
|---|---|---|---|---|---|---|
|
404 |
Read ring answer delay (ring count) |
|||||
|
404** |
Reset ring answer delay to default |
|||||
|
404*V |
Set ring answer delay to V |
|||||
| This parameter determines how many rings will be allowed before the unit answers an incoming call. | ||||||
|
||||||
|
||||||
| Speaker State | ||||||
|---|---|---|---|---|---|---|
|
405 |
Reads speaker state |
|||||
|
405** |
Reset speaker state to default |
|||||
|
405*0 |
Set speaker state to ON |
|||||
|
405*1 |
Set speaker state to OFF |
|||||
|
Determines whether or not the speaker is audible during incoming and outgoing over the phone sessions. |
||||||
|
||||||
|
||||||
| Call-In Timer | ||||||
|---|---|---|---|---|---|---|
|
406 |
Read Call-in Time Limit |
|||||
|
406** |
Reset Call-in Time Limit to default |
|||||
|
406*V |
Set Call-in Time Limit to <V> |
|||||
|
This is the amount of time that the unit will wait between answering the call and the start of a session. Associated with Alarmware™, Log File downloading and Central Station contact. |
||||||
|
||||||
|
||||||
| Dialing Mode | ||||||
|---|---|---|---|---|---|---|
|
407 |
Read dialing mode |
|||||
|
407** |
Reset dialing mode to default |
|||||
|
407*0 |
Set dialing mode to PULSE |
|||||
|
407*1 |
Set dialing mode to TONE |
|||||
|
||||||
|
||||||
| RTU Phone Number | ||||||
|---|---|---|---|---|---|---|
|
408 |
Read RTU Phone Number |
|||||
|
408** |
Reset RTU Phone Number to NONE |
|||||
|
408*DN |
Set RTU Phone Number to DN |
|||||
|
||||||
|
||||||